Nxg-technology NX-V70 Stereo Volume Control Manuel d'utilisateur télécharger pdf

Thank you for purchasing the NX-V70 Stereo Volume Control.

The NX-V70 is a high quality auto-former design which will

nable you to control the volume of a stereo pair of loudspeak-

ers from a remote location. Note: This type of volume control

requires the use of an impedance-matching speaker selector.

Wiring Instructions (Fig. 1):

The NX-V70 has detachable connector blocks to which the

amplifier and speaker wires should be connected. Caution: If

more than two pairs of speakers are to be connected to a sin-

gle amplifier we recommend the use of an impedance match-

ing speaker selector. When connecting the speaker leads from

the amplifier outputs to the volume control input connector

block, strip about an 1/8 inch of insulation from the wire and

twist or solder it so that there are no loose strands. Insert the

wires from the amplifier or speaker selector outputs into the

volume control connector block input.

Note: Wires should stay

consistent right + from the amplifier to right + on the input

side of the connecting block. Most speaker wire has some

form of identification such as raised ribs or color coding to

help determine positive and negative connections. Connect the

outputs to the speaker following the same format as above.

Caution: Do not reverse the input and output connections or

serious damage may occur to your amplifier.

Fig. 1

Mounting (Fig. 2):

Install the completed assembly into a single gang electrical

work box, approximately 18 cubic inches or greater. An open

back electrical box or plaster ring may be more convenient to

work with. The volume control knob, insert and cover plate are

packed separately. Mount the NX-V70 in the electrical box

using the screws provided.

Note: Avoid mounting the NX-V70

next to AC lines or dimmers.

Operational Check:

After making all connections, check for proper operation. Switch

the system to the ON position. Select a music source FM, CD

etc. Slowly increase the volume on the amplifier/receiver to mid

position. Now, slowly advance the volume control knob on the

NX-V70, clockwise from its minimum position towards its

maximum position. You should hear sound emanating from

the speakers, increasing in volume as you rotate the volume

control knob through its steps. Select the level of sound that is

most pleasing to you. If no sound is heard from any or all speak-

ers, switch the system OFF immediately and check for open or

loose connections, wrong polarity or shorts in the wires.

One-Y

ear Limited W

arranty

If this volume control proves to be defective in materials or workmanship within one year from the

date of the original customers purchase, we will, at our option, repair or replace the defective product.

Disclaimer

The warranty stated herein is in lieu of all other war

ranties expressed or implied including mer-

chantability and fitness for par

ticular purpose and all other liabilities and obligations of NXG

Technology, all of which are expressly disclaimed. NXG Technology has not made and does not

hereby make any other representation, warranty or covenant with respect to the condition, quality,

durability, design, operation, capacity

, fitness for use or suitability of this volume control.

Exclusion of Certain Damages

NXG Technology liability for any defective product is limited to repair or replacement of the prod-

uct at our option. NXG Technology shall not be liable for incidental or consequential damages of

any kind or character because of pr

oduct defects. Some states do not allow limitations on how

long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitations and exclusions may not apply.

This Warranty Does Not Cover

Damage caused by abuse, accident, misuse, negligence or improper operation or installation.

oducts that have been alter

ed or modified. Any pr

oduct whose serial number has been alter

ed,

defaced or removed. Normal wear and maintenance. Damages caused by shipping (All claims

for shipping damages must be made with the carrier)

ranty Ser

vice

All warranty repairs must be accompanied by the original bill of sale. No other document is

acceptable or required.

NXG Technology • 16648 North 94th Street • Scottsdale, AZ 85260 • Phone: 1-800-733-0008

Fig. 2

NX-V70 Stereo Volume Control

NX-V70 Stereo Volume Control 1

Résumé du contenu

Page 1 - NX-V70 Stereo Volume Control

Thank you for purchasing the NX-V70 Stereo Volume Control.The NX-V70 is a high quality auto-former design which willenable you to control the volume o

Commentaires sur ces manuels

Pas de commentaire

Nxg-technology NX-V70 Stereo Volume Control Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Nxg-technology NX-V70 Stereo Volume Control. NXG Technology NX-V70 Stereo Volume Control User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Nxg-technology NX-V70 Stereo Volume Control